Use Soft-AP setup mode to connect the GALAYOU G7 Wi-Fi camera through the companion app.
[note] This setup uses a 2.4 GHz Wi-Fi network. The camera does not support 5 GHz Wi-Fi. [/note]
Before You Start
[checklist] * Place the camera within 3 feet of the router * Power on the camera with the attached power cord * Connect the phone to the 2.4 GHz Wi-Fi network * Keep the Wi-Fi password ready [/checklist]
Select the Camera
Open the app, tap Add Device, then choose GALAYOU G2/G7/Y4/G6.
Choose Soft-AP Mode
For Y4 or G6 cameras, select Wi-Fi connection by Soft-AP from the setup mode page.
For G2 or G7 indoor cameras, open the Connect to network page, tap Didn't you hear it?, then select Wi-Fi connection by Soft-AP. Scan the QR code on the camera sticker with the phone camera.
Connect to the Camera Network
Check the camera indicator, then tap Flashing when the matching light pattern is visible.
[reference] Title: G7 Indoor Camera Text: The blue light double-flashes intermittently. Title: G2 Indoor Camera Text: The blue light double-flashes intermittently. Title: Y4 Outdoor Camera Text: The indicator flashes blue and red. Title: G6 Light Bulb Camera Text: The white light flashes. [/reference]
Open the phone Wi-Fi settings and connect to the network named WVC*****. Return to the Wansview Cloud app after the phone connects.
Finish the Connection
In the app, select the 2.4 GHz Wi-Fi network and enter its password. Wait for the camera to connect, then name the camera and begin using it.
[tip] Keep the camera near the router until the connection is complete. [/tip]